Configuring Rate Selectability At The Port Level - Juniper EX9214 Hardware Manual

Table 43: Active Physical Ports on EX9200-12QS Line Card Based on the number-of-ports
Configuration
number-of-ports
Ports Configured (
1
2
3
4
5
6

Configuring Rate Selectability at the Port Level

To configure rate selectability at the port level:
1. In configuration mode, navigate to the [edit chassis fpc
[edit ]
user@host# edit chassis fpc
For example:
[edit ]
user@host# edit chassis fpc 4 pic 0
Active Physical Ports for Different Configured Speeds
Statement)
10-Gigabit
0
0, 1
0, 1, 2
0, 1, 2, 3
0, 1, 2, 3, 4
0, 1, 2, 3, 4, 5
fpc-slot pic pic-number
40-Gigabit
0
0, 1
0, 1, 2
0, 1, 2, 3
0, 1, 2, 3, 4
0, 1, 2, 3, 4, 5
fpc-slot pic pic-number ] hierarchy level.
114
100-Gigabit
2
2, 5
2, 5
2, 5
2, 5
2, 5