Ex9200-40T Line Card - Juniper EX9214 Hardware Manual

See Figure 35 on page 101.
Figure 35: EX9200-32XS Line Card
Ejector lever
1
—
2 Line card LED
—
You can use the
show version
the switch.
Line Card Components
The line card has:
• 32 10-Gigabit Ethernet ports, each of which can house SFP+ transceivers
• 32 dust covers for the ports (shipped in an accessory bag)
• Line card LED—An LED labeled OK/FAIL, which indicates the status of the line card. See
LED in an EX9200 Switch
• LEDs for the ports—One LED on each port, the Link/Activity LED, which indicates the link status and
activity on the port. See
The ports are divided into two port groups of 16 ports each—the ports labeled 0/0 through 0/7 and 1/0
through 1/7 form one port group; the ports labeled 2/0 through 2/7 and 3/0 through 3/7 form the
other port group. The ports in each group share 130 gigabits of bandwidth. Thus, you can transmit up to
130 gigabits of traffic through a port group, without packet drop.

EX9200-40T Line Card

IN THIS SECTION
Line Card Models | 102
command to see the version of Junos OS for EX Series switches loaded on
.
Network Port LEDs on Line Cards in an EX9200 Switch
LEDs for the ports
3
—
4 10-Gigabit Ethernet ports
—
Line Card
.
101