Ex9200-2C-8Xs Line Card - Juniper EX9214 Hardware Manual

EX9200-2C-8XS Line Card

IN THIS SECTION
Line Card Models | 84
Line Card Components | 85
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet interfaces in a
single assembly. Line cards are field-replaceable units (FRUs) that you can install in the line card slots on
the front of the switch chassis. Line cards are hot-insertable and hot-removable: You can remove and
replace them without powering off the switch or disrupting switch functions.
Line Card Models
Table 28 on page 84 shows the model number, description of the line card model, and the Junos OS
release in which the line card was first supported.
Table 28: EX9200-2C-8XS Line Card
Model Description
EX9200-2C-8XS A line card with two 100-Gigabit Ethernet ports, each of which can
house 100-gigabit C form-factor pluggable (CFP) transceivers; and eight
10-Gigabit Ethernet ports, each of which can house 10-gigabit small
form-factor pluggable plus (SFP+) transceivers
84
Junos OS Release
Required
13.2R1 or later