Ex9214 Switch Configurations - Juniper EX9214 Hardware Manual

Table 2: Power Supplies Supported on EX9214 Switches
Power Supply
4100 W AC
4100 W DC
An AC-powered, base-configuration EX9214 switch ships with three 200–240 VAC AC power supplies.
An AC-powered, redundant-configuration EX9214 switch ships with four 200–240 VAC AC power
supplies. See "AC Power Supply in an EX9214 Switch" on page
A DC-powered, redundant-configuration EX9214 switch ships with four –40 VDC through –72 VDC DC
power supplies. See "DC Power Supply in an EX9214 Switch" on page
CAUTION: Do not mix different types of power supplies (AC and DC) in the same
chassis.
SEE ALSO
Connecting and Configuring an EX9200 Switch (CLI Procedure) | 195

EX9214 Switch Configurations

Table 3 on page 10 lists the three hardware configurations for an EX9214 switch—base (AC) and
redundant (AC and DC versions)—and the components included in each configuration.
Input Voltage
200–240 VAC
–40 VDC through –72 VDC
Output Power
4100 W
4100 W
43.
52.
9