Fanfold Paper Loading Procedure - Toshiba BV410T-GS02-QM-S Owner's Manual

2.Printer Setup
10 Lower the top cover gently, press on the front of the top cover with both hands until it "snaps"
into place to make sure that it is closed securely.
Press the [FEED] button to confirm that the label can be removed correctly.
11

Fanfold paper loading procedure

1 Place fanfold paper [1] behind the rear of the printer and insert the end of it into the media slot
[2].
 Place the fanfold paper so that the print side will face upward.
 Place the fanfold paper in parallel to the media slot. Placing it diagonally could cause media feed failures and
paper jams.
 Place the fanfold paper so that the top will be at a position [a] lower than the media slot of the printer by at
least 10 mm (0.39").
 To place the printer and the fanfold paper on a table of a single height, make sure that the distance [b]
between the fanfold paper and the media slot of the printer is at least 100 mm (3.94").
 Make sure that the communication cable, power cable, etc. do not interfere with the fanfold paper.
 If a media feed error occurs, move the media farther away from the printer.
[ 2 ]
[ 1 ]
[a]
[b]
Loading the media 47