Toshiba BV410T-GS02-QM-S Owner's Manual page 25

2.Printer Setup
Setting up Bluetooth mode
Turn off the printer's POWER button.
1
While pressing the [FEED] and [PAUSE] buttons, turn on the power.
2
The system mode opens.
SYSTEM MODE
<0>RESET
<1>DIAGNOSTIC
<2>SET PARAMETERS
<3>TEST PRINT
3 Use the [FEED] button to select the [<6>INTERFACE] menu.
SYSTEM MODE
<4>SENSOR
<5>RAM CLEAR
<6>INTERFACE
<7>RFID<BV410T>
Press the [PAUSE] button.
4
The [<6>INTERFACE] screen opens.
<6>INTERFACE
LAN/WLAN
USB
RS-232C
BLUETOOTH
Use the [FEED] button to select the [BLUETOOTH] submenu.
5
<6>INTERFACE
LAN/WLAN
USB
RS-232C
BLUETOOTH
6 Press the [PAUSE] button.
The [BLUETOOTH] settings screen opens.
<6>INTERFACE
BLUETOOTH
FACTORY TEST
INQUIRY
SECURITY
Use the [FEED] button to select [AUTO CONNECT].
7
<6>INTERFACE
SCAN INTERVAL
SCAN WINDOW
AUTO CONNECT
SSP AUTH
V1.0
V1.0
Preparing to use the printer 25