5.Appendix
4
Remove the take-up side roll of the ribbon from the guide.
1. Remove the right side [1] of the ribbon spooler from the guide hole [2].
2. Remove the left side [3] of the ribbon spooler inserted into the roll from the guide wheel [4].
[ 4 ]
[ 3 ]
Remove the supply side roll of the ribbon from the guide.
5
1. Remove the right side [1] of the ribbon spooler from the guide hole [2].
2. Remove the left side [3] of the ribbon spooler inserted into the roll from the guide wheel [4].
[ 4 ]
[ 3 ]
Remove the ribbon spoolers [2] from the ribbon [1] cores.
6
[ 1 ]
[ 2 ]
[ 1 ]
[ 2 ]
Replacing the supplies 93