5.Appendix
To hold the ribbon spooler, hold the green portion. Handling it by holding the black protrusion at the end could
cause malfunctions.
Insert the ribbon spoolers [1] into the replacement ribbon [2] cores.
7
[ 1 ]
Insert the ribbon spoolers into both supply side roll core and take-up side roll core.
Load the ribbon according to the figure below.
8
[ a ]
[a] Supply side
[b] Take-up side
Pay attention to the front and back sides of the ribbon.
Mount the supply side roll of the ribbon on the guide.
9
94 Replacing the supplies
[ 2 ]
[ 1 ]
[ b ]