Toshiba BV410T-GS02-QM-S Owner's Manual page 32

2.Printer Setup
How to communicate
Bring the host device to within 3 m (9.8 ft) of the printer.
1
Turn on the printer and host device.
2
Confirm that the icon indicating that Bluetooth connection is possible is lit.
3
4 Transmit data from the host device to the printer.
 Connecting via wireless LAN
 Before doing wireless communications, be sure to carefully read the information referenced below.
 P.5 "Precautions for the handling of Wireless Communication Devices"
 Check that there are no obstructions between the printer and the host. Obstructions in between them could cause
poor communications.
1 Place the printer inside the coverage area of the access point.
Turn on the printer and host device.
2
3 Transmit data from the host device to the printer.
Communications may be difficult, depending on the environment in which the printer is being used. Confirm this in
advance. Specifically, communications may be impossible near metal objects, in locations with extensive metal dust,
or in a room enclosed by metal walls, etc.
32 Preparing to use the printer