Toshiba BV410T-GS02-QM-S Owner's Manual page 23

2.Printer Setup
 Connecting with a USB cable
Turn on the computer and start up the Windows system.
1
2 Turn on the printer's POWER button.
Connect the connector of the USB cable [2] to the USB interface [1] for connecting a host
3
computer on the back of the printer.
[ 2 ]
You can prevent the cable from being unplugged by passing the USB cable through the groove on the bottom
side.
Connect the connector on the other end of the USB cable to the USB interface on the computer.
4
Refer to the owner's manual for the computer being used regarding how to connect to the computer.
Use the B type connector of a USB cable that is compliant with the 2.0 standard or higher to connect to the
printer.
[ 1 ]
Preparing to use the printer 23