Ribbon - Toshiba BV410T-GS02-QM-S Owner's Manual

5.Appendix

Ribbon

Use a Toshiba Tec Corporation certified genuine ribbon.
For details about ordering a ribbon, contact your service representative.
Item
Ribbon shape
Ribbon width
Ribbon width tolerance
Ribbon winding width
Maximum ribbon length
Maximum ribbon outer
diameter
Back treatment
Ribbon core Material
Inner diameter
Length
Leader tape
End tape
Winding method
 Use a ribbon to match the width of the media (base). Too small a ribbon width makes the printable width small.
Conversely, too large a ribbon width could cause the ribbon to be wrinkled. Use a ribbon wider than the media
(base) by at least 5 mm (0.20") as indicated below.
Media width
Ribbon width
* When a wristband is used, the minimum media width is 15 mm (0.59").
 Cores with notches can also be used.
 For cores with an inner diameter of 12.7 mm (0.5") and for 25.4 mm (1.0") cores for domestic use
- Align the center of the ribbon with the center of the core and wind the ribbon with the ink side [A] outside.
- Make sure that the misalignment between the centers of the ribbon and the core is within ±1 mm (0.04").
[ A ]
88 Specifications
Spool method
40 to 110 mm (1.57" to 4.33")
Standard width
φ12.7 mm (0.5") inner diameter core: 55 mm (2.17"), 110 mm (4.33")
φ25.4 mm (1.0") inner diameter core: 60 mm (2.36"), 83 mm (3.27"), 110 mm
(4.33")
±1 mm (0.04")
Ribbon width -0/+1 mm (0.04")
φ12.7 mm (0.5") inner diameter core: 100 m (328.1 ft). The maximum ribbon outer
diameter shall not be exceeded.
φ25.4 mm (1.0") inner diameter core: 300 m (984.3 ft). The maximum ribbon outer
diameter shall not be exceeded.
φ12.7 mm (0.5") inner diameter core: φ40 mm (1.57")
φ25.4 mm (1.0") inner diameter core: φ65 mm (2.56")
Yes
Paper
φ12.7 mm (0.5") -0/+0.5 mm (0.02")
φ25.4 mm (1.0") -0/+0.5 mm (0.02")
110 mm (4.33") ±1 mm (0.04")
Polyester film (opaque) 150 mm (5.91") ±5 mm (0.20") or greater
None
Outer roll
25.4* to 50 mm 25.4* to 55 mm
(1" to 1.97") (1" to 2.17")
55 mm
(2.17")
[ A ]
Description
56 to 78 mm
(2.2" to 3.07")
60 mm 83 mm
(2.36") (3.27")
79 to 105 mm
(3.11" to 4.13")
110 mm
(4.33")