Table of Contents
Advertisement
2.Printer Setup
10
When [TOSHIBA TEC BT] appears in [Paired devices], the operation is finished.
An SSP authentication error occurs when the pairing connection fails. In that case, perform pairing connection
again.
iOS pairing procedure
While the printer's power is on, do the pairing settings from the host device.
When doing the pairing settings, set [OFF] for auto reconnect on the printer.
Some of the screens that appear may differ, depending on the host device you are using. Refer to the owner's manual
of the product being used for details.
In the home screen, tap [Settings].
1
In the Settings screen, tap [Bluetooth].
2
In the Bluetooth screen, tap the switch button to set it to on.
3
30 Preparing to use the printer
Advertisement
Table of Contents
