Table of Contents
Advertisement
2.Printer Setup
Connecting with Bluetooth
To use the Bluetooth interface to communicate between the printer and a host device, you need to first do a
connection setting called "Pairing".
The printer has 2 pairing modes to use according to the situation.
This section explains how to switch pairing modes and how to do pairing with a host device (Android device or iOS
device).
The pairing modes are "Auto reconnect disabled mode", which is used to share the printer with multiple Android
devices or iOS devices, and "Auto reconnect enabled mode", which is used only for specified iOS devices.
The "Auto reconnect disabled mode" is the initial setting.
You can check the current pairing mode by the [C] symbol displayed on the LCD.
Mode name
Auto reconnect
enabled mode
Auto reconnect
disabled mode
24 Preparing to use the printer
Icon displayed when power
is turned on
[C] symbol is lit
[C] symbol is off
Usage
Used only for
After turning on the power,
specified iOS devices.
attempts to connect to the last
host device that was connected.
Used by sharing with
After turning on the power,
multiple Android
waits for connection from a host
devices and iOS
device. A pairing operation from
devices.
the host device is necessary.
Function
Advertisement
Table of Contents
