Analyzer Messages - HP 64767 User Manual

Emulation/analysis
Table of Contents

Advertisement

912
Lab firmware analysis subsystem; product address: %s
Cause: This message should never occur. It shows that you have an unreleased
version of analysis firmware.
913
Lab firmware subsystem; product address: %s
Cause: This message should never occur. It shows that you have an unreleased
version of system controller firmware.
914
Lab firmware auxiliary subsystem; product address: %s
Cause: This message should never occur. It shows that you have an unreleased
firmware version of the auxiliary subsystem.

Analyzer Messages

1105
Unable to delete label; used by emulation analyzer: <label>
Cause: This error occurs when you attempt to delete an emulation trace label
which is currently being used as a qualifier in the emulation trace specification or is
currently specified in the emulation trace format.
Action: You stop the trace or must change the trace command before you can
delete the label.
1106
Unable to delete label; used by external state analyzer: <label>
Cause: This error occurs when you attempt to delete an external trace label which
is currently being used as a qualifier in the external state trace specification or is
currently specified in the external trace format.
Action: You stop the trace or must change the trace command before you can
delete the label.
1107
Unable to delete label; used by external timing analyzer: <label>
Cause: This error occurs when you attempt to delete an external trace label which
is currently being used as a qualifier in the external timing trace specification.
Action: Remove the label from the external timing analyzer specifications, and
then delete the label.
Chapter 13: Error Messages
Terminal Interface Messages
471

Advertisement

Table of Contents
loading

This manual is also suitable for:

80186/8/xl/ea/eb

Table of Contents