Table of Contents
Advertisement
Setting the Debug/Trace Options
In order to set the debug/trace options, you must first start the configuration
interface and access the "Debug/Trace Options" configuration section (refer to the
previous "Using the Configuration Interface" section).
This section shows you how to:
•
Specify a processor clock rate greater than 16 MHz.
•
Enable/disable breaks on writes to ROM.
•
Include/exclude background states in the trace.
To specify a processor clock rate greater than
16 MHz
• Answer "yes" to the "Will the processor clock rate be more than 16 MHz?"
question.
Some analysis modules must have time tagging turned OFF if the processor clock
rate will be greater than 16 MHz. If the analysis module in the HP 64700 cannot
count time above 16 MHz, time counting will be disabled.
Chapter 5: Configuring the Emulator
Setting the Debug/Trace Options
127
Advertisement
Table of Contents
