To Enter A Command - HP 64767 User Manual

Off means the command line is not displayed and you use only the pulldown menus
and the action keys to control the interface.
The command line area begins just below the status line and continues to the
bottom of the emulator/analyzer window. The status line is not part of the
command line and continues to be displayed whether the command line is on or off.
Choosing certain pulldown menu items while the command line is off causes the
command line to be turned on. That is because the menu item chosen requires
some input at the command line that cannot be supplied another way.

To enter a command

1 Build a command using the softkey label pushbuttons by successively positioning
the mouse pointer on a pushbutton and clicking the pushbutton select mouse button
until a complete command is formed.
2 Execute the completed command by clicking the Return pushbutton (found near
the bottom of the command line in the "Command" group).
Or:
Execute the completed command using the Command Line entry area popup menu:
Position the mouse pointer in the command line entry area; press and hold the
select mouse button until the Command Line popup menu appears; then, choose the
Execute Command menu item.
You may need to combine pushbutton and keyboard entry to form a complete
command.
A complete command is a string of softkey labels and text entered with the
keyboard. You know a command is complete when Return pushbutton is not
halfbright. The interface does not check or act on a command, however, until the
command is executed. (In contrast, commands resulting from pulldown menu
choices and action keys are supplied with the needed carriage return as part of the
command.)
Chapter 4: Entering Commands
Using the Command Line with the Mouse
85