Table of Contents
Advertisement
Chapter 9: Using the External State Analyzer
Setting Up the External Analyzer
CAUTION
Turn OFF target system power before connecting analyzer probe wires to the target
system. The probe grabbers are difficult to handle with precision, and it is
extremely easy to short the pins of a chip (or other connectors which are close
together) with the probe wire while trying to connect it.
3 You can connect the grabbers to pins, connectors, wires, etc., in the target system. Pull the hilt of the
grabber towards the back of the grabber handle to uncover the wire hook. When the wire hook is around
the desired pin or connector, release the hilt to allow the grabber spring tension to hold the connection.
272
Advertisement
Table of Contents
