Display Io_Port - HP 64767 User Manual

display io_port

This command displays the contents of the specified I/O port location or series of
locations.
Initial values are the same as specified by the command:
display io_port 0 absolute bytes
Defaults are values specified in a previous display io_port command.
The parameters are as follows:
absolute Formats the I/O port listing in a single column.
blocked Formats the I/O port listing in multiple columns.
bytes
Displays the absolute or blocked I/O port listing as byte values.
Chapter 12: Emulator/Analyzer Interface Commands
display io_port
349