Table of Contents
Advertisement
Chapter 7: Using the Emulation Analyzer
Modifying the Trace Display
To display time counts in absolute or relative
format
• Use the count option to the display trace command.
Count information may be displayed two ways: relative (which is the default), or
absolute. When relative is selected, count information is displayed relative to the
previous state. When absolute is selected, count information is displayed relative to
the trigger condition.
The count absolute/relative trace display option is not available when counting is
turned off in the trace command.
Examples
To display the trace with absolute time counts:
set default <RETURN>
display trace count absolute <RETURN>
228
Advertisement
Table of Contents
