Softkey Interface Conventions - HP 64767 User Manual

Status line. Displays the emulator and analyzer status. Also, when error and
status messages occur, they are displayed on the status line in addition to being
saved in the error log.
Command line. Commands are entered on the command line by pressing
softkeys (or by typing them in) and executed by pressing the Return key. The Tab
and Shift-Tab keys allow you to move the cursor on the command line forward or
backward. The Clear line key (or CTRL-e) clears from the cursor position to the
end of the line. The CTRL-u key clears the whole command line.

Softkey Interface Conventions

Example Softkey Interface commands throughout the manual use the following
conventions:
bold Commands, options, and parts of command syntax.
bold italic Commands, options, and parts of command syntax which
may be entered by pressing softkeys.
normal User specified parts of a command.
Represents the UNIX prompt. Commands which follow
$
the "$" are entered at the UNIX prompt.
The carriage return key.
<RETURN>
Chapter 1: Getting Started
25