To Turn Off The Restriction To Real-Time Runs; To Enable/Disable Entry Into The Monitor After Configuration - HP 64767 User Manual

To turn OFF the restriction to real-time runs

• Answer "no" to the "Restrict to real-time runs?" question.
All commands, regardless of whether or not they require a break to the emulation
monitor, are accepted by the emulator.
To enable/disable entry into the monitor after
configuration
• Answer "yes" or "no" to the "Enter monitor after configuration?".
This question allows you to select whether the emulator will be running in the
monitor or held in the reset state on completion of the emulator configuration.
The answer to this configuration question is important in some situations. For
example, when the target system is turned off (and there is no external clock
signal), do not select reset to monitor. Otherwise, configuration will fail.
Chapter 5: Configuring the Emulator
Modifying the General Configuration Items
115