Table of Contents
Advertisement
Chapter 6: Using the Emulator
Using Software Breakpoints
Examples
To set permanent breakpoints using the mnemonic memory display popup menu:
Click this line to set a
breakpoint.
Click this line to
clear a breakpoint.
(Asterisks mark set
breakpoints.)
Bring up menu and
choose this item to
set (or clear) a
breakpoint on the
highlighted line.
To set a temporary breakpoint
• Place an absolute or symbolic address in the entry buffer; then, choose
Breakpoints→Temporary () (or Breakpoints→Set () if your version of
HP 64700 system firmware is less than A.04.00).
• Using the command line, enter the modify software_breakpoints set <address>
temporary or modify software_breakpoints set <address> command.
The breakpoints feature must be enabled before individual breakpoints can be set.
156
Advertisement
Table of Contents
