To Restore Traces - HP 64767 User Manual

To restore traces

• Choose File→Load→Trace Data.
• Using the command line, enter the load trace command.
The restored trace depth is the depth specified when the trace was stored and cannot
be increased. You may want to increase the trace depth before storing traces.
When a trace is loaded, the trace command is not restored. A trace again or trace
modify command will use the last trace command entered, not the command which
resulted in the loaded trace. Also, the trace status shown by the display status
command does not reflect the loaded trace.
Examples
To restore the "trcfile.TR" trace file:
load trace trcfile <RETURN>
The trace information stored in "trcfile.TR" is restored. You can view the trace as
you would any other trace.
Chapter 7: Using the Emulation Analyzer
Saving and Restoring Traces
235