Table of Contents
Advertisement
Chapter 7: Using the Emulation Analyzer
Qualifying Trigger and Store Conditions
State Qualifiers
Whenever a state can be specified in the trace command (trigger state, storage state,
prestore state, etc.), you will see the following softkeys that allow you to qualify the
state:
address
data
status
When a value is specified without one of these softkeys it is assumed to be an
address value.
204
The value following this softkey is searched for on the lines that
monitor the emulation processor's address bus.
The value following this softkey is searched for on the lines that
monitor the emulation processor's data bus.
The value following this softkey is searched for on the lines that
monitor other emulation processor signals.
Advertisement
Table of Contents
