Store - HP 64767 User Manual

Emulation/analysis
Table of Contents

Advertisement

Chapter 12: Emulator/Analyzer Interface Commands

store

store
This command lets you save the contents of specific memory locations in an
absolute file. You also can save trace memory contents in a trace file.
The store command creates a new file with the name you specify, if there is not
already an absolute file with the same name. If a file represented by <FILE>
already exists, you must decide whether to keep or delete the old file. If you
respond with yes to the prompt, the new file replaces the old one. If you respond
with no, the store command is canceled and no data is stored.
The transfer address of the absolute file is set to zero.
The parameters are as follows:
--EXPR--
This is a combination of numeric values, symbols, operators, and parentheses,
specifying a memory address. See the EXPR syntax diagram.
<FILE>
This represents a file name you specify for the absolute file identifier or trace file
where data is to be stored. If you want to name a file beginning with a number, you
must precede the file name with a backslash (\) so the system will recognize it as a
file name.
memory
This causes selected memory locations to be stored in the specified HP64000
format file with a .X extension.
412

Advertisement

Table of Contents
loading

This manual is also suitable for:

80186/8/xl/ea/eb

Table of Contents