When The Indicators Show An Error Reading - Ricoh IS330DC - IS - Flatbed Scanner Operating Instructions Manual

When the Indicators Show an Error Reading

This section explains the meaning of error readings displayed on the indicator
of this unit and the measures to be taken.
Note
If an error that is not shown in the previous table occurs, switch off the unit
and then switch the power back on. If the error reading has not disappeared,
contact your nearest service shop and give a description of the error reading.
-
-
-
:On
:Blinking
-:Off
Error description
The Automatic Docu-
- ment Feeder (ADF) or its
cover is not fully closed.
A document is jammed
inside the Automatic
Document Feeder (ADF).
The document is not trans-
ported by the Automatic
Document Feeder (ADF) in
the expected way.
System error
When the Indicators Show an Error Reading
Solution
Close the Automatic Doc-
ument Feeder (ADF) or
its cover fully.
Remove the jammed doc-
ument.
Remove the document
that was not transported
correctly.
Contact your nearest ser-
vice shop.
3
19