Series Commissioning - Siemens SINAMICS G120 Function Manual

4.8

Series commissioning

In order to perform standard commissioning, you must have saved a project in STARTER.
To copy all the parameters of one inverter to a second inverter, follow the instructions in the
section Downloading parameters (Page 161).
Steps to be carried out after downloading the parameters:
● If you activate your inverter via PROFIsafe, you have to modify the PROFIsafe address.
● Perform a reduced acceptance test for the safety functions. The necessary steps are
Safety Integrated Function Manual, SINAMICS G120 and G120C
Function Manual, 01/2011, FW 4.4, A5E03052391B AB
– Setting the PROFIsafe address for Basic Safety (Setting STO (Page 115)):
– Setting the PROFIsafe address for Extended Safety (Setting forced dormant error
detection and the PROFIsafe address (Page 135)):
described in the section Reduced acceptance test (Page 166).
Commissioning
4.8 Series commissioning
163