Activate Settings - Siemens SINAMICS G120 Function Manual

Commissioning
4.6 Extended Safety
● Click the "Safety Inputs" button.
● Specify which F-DI-Status you want to transfer via PROFIsafe:
Note
The F-DI status is transferred irrespective of whether you use the F-DI to activate a fail-
safe function.
4.6.3.12

Activate settings

● Click "Copy parameters" and then click "Activate settings":
● You are prompted to allocate a password if the password = 0 (factory setting).
● Confirm the prompt for saving your settings (copy RAM to ROM).
● Switch off the inverter supply voltage.
● Wait until all LEDs on the inverter go dark. Now switch on the inverter supply voltage
158
If you try to set a password that is not permissible, the old password will not be changed.
Further information can be found in the section Password (Page 71).
again. Your settings only become effective after this power-on reset.
Safety Integrated Function Manual, SINAMICS G120 and G120C
Function Manual, 01/2011, FW 4.4, A5E03052391B AB