Commissioning; Commissioning Guidelines - Siemens SINAMICS G120 Function Manual

Commissioning

4.1

Commissioning guidelines

The steps for commissioning the safety functions form part of the activities for
commissioning the entire drive. Depending on whether you activate the safety functions via
fail-safe inputs or connect the inverter to PROFIsafe, we recommend that you use one the
following two commissioning procedures.
Control the inverter via fail-safe digital inputs (F-DI)
You can find an overview of all of the manuals for your inverter in section Manuals for your
inverter (Page 229).
Safety Integrated Function Manual, SINAMICS G120 and G120C
Function Manual, 01/2011, FW 4.4, A5E03052391B AB
Information on the commissioning
steps can be found in the following
sections or manuals:
①
Manuals for your control, e.g.
Step-7 manuals.
②
Operating instructions
and
Fail-safe digital inputs (Page 76)
③
Operating instructions
④
Selecting the commissioning
method (Page 108)
⑤
Operating instructions
⑥
Acceptance test - Completion of
commissioning (Page 164)
4
105