Extended Safety With Activation Via Profisafe; Defining The Commissioning Method - Siemens SINAMICS G120 Function Manual

Commissioning
4.6 Extended Safety
4.6.2

Extended Safety with activation via PROFIsafe

Procedure
● Go online with STARTER.
● In STARTER, call up the screens displaying the fail-safe functions and click on "Change
4.6.2.1

Defining the commissioning method

●
●
●
134
settings":
①
Set "Motion monitoring via PROFIsafe".
②
If you use one of the safety functions SS1 or SLS, then you must select the monitoring
mode of these functions.
More detailed information on the modes can be found in the following sections:
– Monitoring modes of SS1 (Page 21)
– Monitoring modes of SLS (Page 28)
③
Click on the "Configuration" button.
Safety Integrated Function Manual, SINAMICS G120 and G120C
Function Manual, 01/2011, FW 4.4, A5E03052391B AB