Cvm1 And Cv-Series Optical Ring Controller Link Units (H-Pcf Cable) - Omron SYSMAC CS1W-CLK13 Operation Manual

Component Names and Functions
3-1-2 CVM1 and CV-series Optical Ring Controller Link Units (H-PCF
Cable)
CVM1-CLK12
(Refer to p. 49, 236.)
Indicators
LED indicators that display the Unit and Network status.
(Refer to p. 81.)
Unit number switches
Two rotary switches. The unit number is set in 2-digit decimal
for the Network to which the PLC is connected.
(Refer to p. 82.)
Node address switches
Two rotary switches. The node address of the Unit on the
Controller Link Network is set in 2-digit decimal.
Optical connectors (Refer to p. 63.)
For connecting the Controller Link Network communications
cables (H-PCF Optical Fiber Cable).
Power supply terminals (Refer to p. 73.)
For connecting the backup power supply for the node bypass
function.
Section 3-1
51