Omron SYSMAC CS1W-CLK13 Operation Manual page 349

Standard Models
Assembly Tools
The following tools are used to assemble optical networks.
Note The S3200-COCF2071/2571 Optical Connector can still be assembled if the JRFK-57PLUS (Sumitomo
Electric Industries) is added to the S3200-CAK1062.
Discontinued Models
GI Optical Fiber Cable Connectors and Accessories
Required Optical Characteristics
50/125 µm AGF Cable
Item Minimum
Numerical Aper- ---
ture (N.A.)
Transmission ---
loss
Connection loss ---
Transmission 500
bandwidth
Note L is fiber length in km, T
f
62.5/125 µm AGF Cable
Item Minimum
Numerical Aper- ---
ture (N.A.)
Transmission ---
loss
Connection loss ---
Transmission 200
bandwidth
Note L is fiber length in km, T
f
Connectors
Name
ST Connector CAS-125
326
Specifications
Optical Connector Assem-
bly Tool
Optical Power Tester
Master Fiber
Name
Optical Connector S3200-CAK1062
Assembly Tool
Standard Maximum
0.21 ---
--- 3.0 Lf
3.0 Lf + 0.2
3.0 Lf + 0.4
--- 1.0
--- ---
is ambient temperature, and λ is the peak wavelength of the test light source.
a
Standard Maximum
0.28 ---
--- 3.5 Lf
3.5 Lf + 0.2
3.5 Lf + 0.4
--- 1.0
---
is ambient temperature, and λ is the peak wavelength of the test light source.
a
Model
Specifications
Applicable Connector:
S3200-COCF2071/2571
Enclosed Head Unit: CAT-2702
Applicable Connector:
S3200-COCF2071/2571
Applicable Head Unit:
CAT-2702
Model Specifications
Optical connector:
S3200-COCF2011/
2511
Unit
--- Theoretical value
0.5 km ≤ Lf
dB
0.2 km ≤ Lf < 0.5 km
Lf < 0.2 km
λ = 0.8 µm, one location
λ = 0.85 µm (LD)
MHz⋅km
Unit
--- Theoretical value
0.5 km ≤ Lf
dB
0.2 km ≤ Lf < 0.5 km
Lf < 0.2 km
λ = 0.8 µm, one location
λ = 0.85 µm (LD)
MHz⋅km
Sumitomo Electric Industries
Appendix B
Model
CAK-0057
(See note.)
CAT-2700
CAT-2001H
Manufacturer
OMRON
Conditions
λ = 0.8 µm
T = 25°C
a
Conditions
λ = 0.8 µm
T = 25°C
a
Manufacturer