Omron SYSMAC CS1W-CLK13 Operation Manual page 45

Specifications and Configurations
22
Optical Fiber Cables (Indoor Use Only)
Use the following Optical Fiber Cables (Hard Plastic-clad Fiber: H-PCF).
Name
H-PCF cables
Note The Optical Fiber Cable model numbers are as follows.
S3200-H@@@@@@@
Name
Connector
Inline Adapter S3200-COIAT2000
Discontinued Models
Name
Optical Connector S3200-COCF2011
Note 1. Either full-lock or half-lock connectors can be used in a Controller Link Net-
work, but we recommend full-lock connectors to prevent accidental discon-
nections during operation.
2. The maximum distance between nodes is slightly shorter for connectors
with crimp-cut cables compared to connectors assembled with adhesive.
Also, the maximum distance is reduced due to extension loss when Inline
Adapters are used to extend cables.
Specifications
Black
Orange
Tensioner option
None: Standard (with tension member)
N:
Cable length
@@@
A B
(A/10) x 10
Cable color
B: Black
O: Orange
Cable specification
L: With power supply line
C: Without power supply line
Type
B: Cord
C: Cable
Model
S3200-COCF2071 Use to connect a cable to a node.
(Full-lock connector for crimp-cut cable.)
S3200-COCF2571 Use to connect a cable to a node.
(Half-lock connector for crimp-cut cable.)
Use to connect or extend cables.
(Use one adapter for each connection.)
Model
S3200-COCF2511
10 m S3200-HCCB101
50 m S3200-HCCB501
100 m S3200-HCCB102
500 m S3200-HCCB502
1,000 m S3200-HCCB103
10 m S3200-HCCO101
50 m S3200-HCCO501
100 m S3200-HCCO102
500 m S3200-HCCO502
1,000 m S3200-HCCO103
Without tension member
B m
Specifications
Recommended Manufacturer
replacement
S3200-COCF2071 OMRON
S3200-COCF2571
Section 1-2
Model