Component Names And Functions; Cs-Series Optical Ring Controller Link Units (H-Pcf Cable) - Omron SYSMAC CS1W-CLK13 Operation Manual

Component Names and Functions

3-1 Component Names and Functions
3-1-1

CS-series Optical Ring Controller Link Units (H-PCF Cable)

CS1W-CLK13
CS1W-CLK12-V1
48
This section describes the names and functions of the Controller Link Unit
components. This section also describes the operation of the indicators.
(Refer to p. 49, 236.)
Indicators
LED indicators that display the Unit and network status.
Unit number switch
One rotary switch. The unit number is set in single-digit
hexadecimal.
Node address switches
Two rotary switches. The node address of the Unit on the
Controller Link Network is set in 2-digit decimal.
Optical connectors
Connectors to connect to the Controller Link Network communications
cable (H-PCF Optical Fiber Cable).
Power Supply Terminal Block
Connect the backup battery for the node bypass function.
(Refer to p. 77.)
(Refer to p. 78.)
(Refer to p. 63.)
(Refer to p. 73.)
Section 3-1