Omron SYSMAC CS1W-CLK13 Operation Manual page 330

Changing the Data Link Tables with Active Data Links
8. The following message box will be displayed. Click the Yes Button. If the
Yes Button is clicked, the current data link table open in the CX-Net will be
compared with the data link table of the node to be changed. If the No But-
ton is clicked, the data link tables will not be compared.
After comparison, is there is any discrepancy, the following message box
will be displayed. Click the OK Button to check the differences.
The differences between the data link table open on the CX-Net and that
of the node to be changed will be displayed.
9. Check that the changes are correct, and click the OK Button.
10. The message box for confirming data link table transfer will be displayed.
Click the Yes Button to transfer the data link table. The transfer can be can-
celled by clicking the No Button. (The active data link table will not be
changed if the transfer is cancelled.)
Section 11-2
307