Omron SYSMAC CS1W-CLK13 Operation Manual page 367

Revision History
Revision Date Revised content
code
05 August 2004 Changes were made throughout the manual associated with new functionality in upgrades for Controller Link
Units with unit version 1.2 or later, CX-Programmer version 5.0 or later, and CPU Units with unit version 3.0 or
later, including the following changes.
Page v: Added information on unit versions.
Page xviii: Changed EMI standard from EN50081-2 to EN61000-6-4.
Page 7: Added specifications for new unit versions to table and added information for data links.
Page 9: Changed the number of network levels from three to eight and added note.
Pages 10 and 11: Added information on lot numbers.
Page 15: Added specifications for new unit versions to table.
Pages 17 and 19: Removed note and changed information in diagram.
Page 20: Added information.
Pages 21 and 22: Changed "11" to "71" at the end of model numbers in both tables and added information to
table.
Page 24: CX-Programmer model No. changed in table and notes added and changed under table.
Pages 26, 27, 28, and 31: Changed model number in table and added note and lot number information.
Page 32: Added precautions.
Page 34: Removed "SYSMAC Support Software" from table.
Page 39: Added information on lot numbers.
Page 59: Changed and added information.
Pages 77, 80, 81, 103, and 256: Removed "SYSMAC Support Software" from paragraph.
Page 84: Added information on data links and changed "Controller Link Support Software (Ver. 2.0)" to "Sup-
port Software."
Pages 86 and 87: Added information to note.
Page 89: Added information to table.
Page 94: Changed information in table and Note 1.
Pages 95 and 96: Added note.
Page 105: Added information to note.
Page 107: Changed "IR" to "CIO" in table and changed note.
Pages 109 and 110: Added information to table.
Page 111: Added information to notes.
Page 113: Changed "IR" to "CIO" in area types.
Page 114: Added information to table and changed note.
Page 115: Added information to note.
Page 117: Changed "IR" to "CIO" in table, added information to table and note.
Page 118: Added information to note.
Page 135: Added notes.
Pages 146 and 227: Changed reference manual.
Page 175: Changed information in table for response code 05 04.
Page 181: Changed information in note.
Page 221: Changed graphic, removed "interrupt" and replaced table.
Page 222: Changed "15 ms or 8 ms" to "25 ms" and "10 ms or 8 ms" to "10 ms" for cycle times.
Page 223: Changed possible delay from one to "one or two cycles" and added note.
Page 224: Changed data processing time equation and values in table.
Pages 236 and 137: Added information to table.
Page 260: Changed information for 0110 hex.
Page 262: Changed information for 0216 and 021A hex and added information for 0230 hex.
Page 263: Added note.
Page 264: Added new sub-section 10-4 Troubleshooting Error Messages in CX-Net Data Link Table Check.
Pages 292 and 296: Added information to note on lot numbers.
Page 315: Changed information for CX-Programmer
Page 316: Changed "11" to" 71" at end of model number and added models to connector table.
Page 317: Changed "11" to" 71" at end of model numbers.
Page 318: Changed and added information on Assembly Tools.
344