Definition Of Safety Warning Levels - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router
Related
Documentation

Definition of Safety Warning Levels

Supported Platforms
168
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Avoid spilling liquid onto the chassis or onto any hardware component. Such an action
could cause electrical shock or damage the hardware equipment.
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Some parts of the router might become hot. The following label provides the warning
of the hot surfaces on the router:
General Safety Warnings for Juniper Networks Devices on page 170
ACX Series , JCS 1200 , M Series
The documentation uses the following levels of safety warnings:
NOTE: You might find this information helpful in a particular situation, or
might otherwise overlook it.
CAUTION: You must observe the specified guidelines to avoid minor injury
or discomfort to you, or severe damage to the hardware device.
WARNING: This symbol alerts you to the risk of personal injury from a laser.
WARNING: This symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents.
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in
een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige
apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische
schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard
maatregelen om ongelukken te voorkomen.
Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi
johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa,
, MX Series , PTX Series , T Series
Copyright © 2015, Juniper Networks, Inc.