Juniper ACX5048 Manual page 140

ACX5048 and ACX5096 Universal Access Router
Related
Documentation
120
NOTE: The switch powers on as soon as power is provided to the power
supply. There is no power switch on the device.
Verify that the and
10. IN OUT
CAUTION: A system reboot with Routing Engine FPGA version 7.1 might
not successfully boot the Junos OS software. In case of a system reboot
failure, you need to power cycle the switch. To check the current FPGA
version, issue the
DC Power Supply for an ACX5000 Router on page 39
DC Power Supply LEDs on an ACX5000 Router on page 31
LEDs on the power supply are lit green and are on steadily.
command.
show chassis firmware
Copyright © 2015, Juniper Networks, Inc.