Copyright © 2015, Juniper Networks, Inc.
Figure 31: Attach 1 U Router to Rack
Figure 32: Slide Mounting Rail onto the ACX5096 Rear Mounting Blade
Continue to support the router while sliding the rear mounting-blades into the channel
8.
of the side mounting-rails and securing the blades to the rack. Use the four mounting
screws (and cage nuts and washers if your rack requires them) to attach each blade
to the rack. Use eight front-mounting screws for the ACX5096. Tighten the screws.
See
Figure 33 on page
108.
Chapter 10: Installing the Router
107