Juniper ACX5048 Manual page 125

Copyright © 2015, Juniper Networks, Inc.
Screws to secure the mounting rails to the chassis (provided).
Twelve screws for ACX5048
Twenty-four screws for ACX5096
Eight screws to secure the chassis and rear installation blades to the rack (not
provided).
For two-post installations (ACX5096 only):
One pair of mounting brackets (provided).
Sixteen screens for attaching the brackets to the chassis (provided).
Four screws to secure the mounting brackets and chassis to the post (not
provided).
Appropriate screwdriver for the mounting screws (not provided).
Two power cords with plugs appropriate to your geographical location (provided).
RJ-45 cable and RJ-45 to DB-9 serial port adapter (provided).
Management host, such as a PC laptop, with a serial port (not provided).
Optional equipment: Grounding cable kit with bracket, lug, and three nuts with integrated
washers.
WARNING: The 1 U ACX5048 must be supported at all four corners. Mounting
the chassis using only the front brackets will damage the chassis and can
result in serious bodily injury.
CAUTION: All ACX5000 routers require two people for installation, one
person to lift the router into place, and another person to attach the router
to the rack. If you are installing the ACX5000 routers above 60 in. (152.4 cm)
from the floor, you can remove the power supplies and fan modules to
minimize the weight before attempting to install the router.
CAUTION: If you are mounting multiple routers on a rack, mount the router
in the lowest position of the rack first. Proceed to mount the rest of the routers
from the bottom to the top of the rack to minimize the risk of the rack toppling.
Chapter 10: Installing the Router
105