Copyright © 2015, Juniper Networks, Inc.
Figure 39: DC Power Supply Faceplate for a ACX5000 Router
1
8
7
1—
Shunt negative input terminals (+RTN)
2—
Shunt positive input terminals (–48V)
3—
Terminal block
4—
Ejector lever
CAUTION:
The V+ terminals are shunted internally together, as are the
V– terminals. The same polarity terminal can be wired together from the
same source to provide an additional current path in a higher power
chassis. Do not connect the terminals to different sources.
Figure 40: Securing Ring Lugs to the Terminals on the ACX5000 DC Power
Supply
Replace the terminal block cover.
8.
Close the input circuit breaker.
9.
Chapter 11: Connecting the Router to Power
2
3
4
6
5
5—
ESD grounding point
6—
Fault LED
7—
Output LED
8—
Input LED
119