Juniper ACX5048 Manual page 152

ACX5048 and ACX5096 Universal Access Router
Related
Documentation
132
Ensure that the rack is stable and secured to the building.
Ensure that there is enough space to place the removed ACX5000 router in its new
location and along the path to the new location.
Read General Safety Guidelines and Warnings.
Use the appropriate power off sequence to safely powered off the device. See
Off an ACX5000 Router" on page
Disconnect the power cords.
Ensure that you have disconnected any cables or wires attached to the ACX5000
router ports.
Ensure that you have the following parts and tools available:
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack
mounting screws, for mounting the ACX5000 router on the rack.
To remove an ACX5000 router from a rack or cabinet:
Have one person support the weight of the router while another person uses the
1.
screwdriver to remove the front mounting screws that attach the chassis mounting
brackets to the rack or cabinet.
Remove the router from the rack or cabinet.
2.
Use the screwdriver to remove the mounting screws that attach the mounting blades
3.
attached to the rear of the rack or cabinet.
Place the removed screws and mounting blades in a labeled bag. You will need them
4.
when you reinstall the chassis.
Transport the router to your desired new location.
5.
Mounting an ACX5000 Router in a Rack or Cabinet on page 104
129.
Copyright © 2015, Juniper Networks, Inc.
"Powering