Figure 4: Acx5096 Interface Port Mapping - Juniper ACX5048 Manual

Table 6: CLI Equivalents of Terms Used in Documentation for an ACX5096 Router (continued)
Hardware
Item (as
displayed in Description (as
the CLI) displayed in the CLI)
FPC (n) Abbreviated name of
the Flexible PIC
Concentrator (FPC)
PIC (n) Abbreviated name of
the Physical Interface
Card (PIC)
96x10G–8x40G
Xcvr (n) Abbreviated name of
the transceiver
Power Built-in power supply
supply (n)
Fan Fan
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Value (as displayed
in the CLI)
Value of n is always 0.
Value of n is always 0.
PIC 0
n is a value equivalent
to the number of the
port in which the
transceiver is
installed.
n is a value in the
range of 0-1.
n is a value in the
range of 0-2 for
ACX5096

Figure 4: ACX5096 Interface Port Mapping

1— Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (96)
ACX5000 Universal Access Router Overview on page 3
Chapter 1: System Overview and Architecture
Item in Documentation Additional Information
The router does not have Interface Naming Conventions
actual FPCs. In this case, Used in the Junos OS Operational
FPC refers to the router Commands
itself.
The router does not have Interface Naming Conventions
actual PIC devices; see Used in the Junos OS Operational
entries for PIC 0 for the Commands
equivalent item on the
router.
Built-in network ports on "ACX5000 Universal Access
the front panel of the Router Overview" on page 3
router
Optical transceivers Port and Interface Specifications
AC power supply "AC Power Supply for an
ACX5000 Router" on page 37
DC power supply
"DC Power Supply for an
ACX5000 Router" on page 39
Fan "Cooling System and Airflow in
an ACX5000 Router" on page 33
3— 40 Gigabit Ethernet ports (8)
9