Juniper ACX5048 Manual page 95

Table 35: Interface Support for 40-Gigabit Ethernet QSFP+ Transceivers for ACX5000
Routers (continued)
Ethernet
Specifications
Standard
Distance 2 km
4x10BASE Product JNP-QSFP-4x10GE-IR
SKU
-IR
Number
Rate 40 Gbps (10 Gbps per lane)
Connector Single mode fiber ribbon cable with female, MPO-APC connector (angled 8 degrees)
type
NOTE:
Fiber 12
count
Lane Lanes 0 through 3–1310 nm
wavelength
(typical)
Minimum -6.0 dBm (per lane)
launch
power
Maximum 1.5 dBm (per lane)
launch
power
Minimum –
receiver
sensitivity
DOM Available
support
Fiber type SMF
Core/ claddi n g 9/125 µm
size
Distance 1.4 km (.9 miles)
Copyright © 2015, Juniper Networks, Inc.
100 m (328 ft)
See Cable Specifications for QSFP+ and QSFP28 Transceivers for more information.
Chapter 7: Port and Interface Specifications
150 m (492 ft)
Parallel Single Mode
75