Figure 35: Connecting A Grounding Cable To A 1 U Acx5048; Figure 36: Connecting A Grounding Cable To The 2 U Acx5096 - Juniper ACX5048 Manual

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Secure the provided protective earthing terminal bracket through the ACX5000 router
1.
mounting bracket to the chassis with the nut provided. The posts on the protective
earthing terminal bracket should point to the left. See
Figure 36 on page 113.

Figure 35: Connecting a Grounding Cable to a 1 U ACX5048

Figure 36: Connecting a Grounding Cable to the 2 U ACX5096

Connect one end of the grounding cable to a proper earth ground, such as the rack in
2.
which the router is mounted.
Place the grounding lug attached to the grounding cable over the protective earthing
3.
terminal on the protective earthing terminal bracket.
Secure the grounding lug to the protective earthing terminal with two nuts.
4.
Dress the grounding cable and ensure that it does not touch or block access to other
5.
device components and that it does not drape where people could trip over it.
General Safety Guidelines and Warnings
Grounded Equipment Warning
Connecting AC Power to an ACX5000 Router on page 114
Connecting DC Power to an ACX5000 Router on page 116
Chapter 11: Connecting the Router to Power
Figure 35 on page 113
10
8
6
4
2
0
11
9
7
5
3
1
58
56
54
52
50
4 8
59
57
55
53
51
49
and
113