Starter Removal/Installation [Z6] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Starter
1 (See STARTER REMOVAL/INSTALLATION
(See STARTER INSPECTION.)

STARTER REMOVAL/INSTALLATION [Z6]

Warning
• When the battery cables are connected, touching the vehicle body with starter terminal B will
generate sparks. This can cause personal injury, fire, and damage to the electrical components.
Always disconnect the negative battery cable before performing the following operation.
1. Remove the battery cover. (See
2. Disconnect the negative battery cable.
3. Remove the under cover.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Downloaded from
[LF].)
BATTERY REMOVAL/INSTALLATION
https://carmanualshub.com/
[Z6].)
- automotive repair manuals website
B3E011918400W03