3 Engine Mount Rubber And No.3 Engine Mount Bracket Installation Note; Crankshaft Pulley Lock Bolt Installation Note - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Tightening torque
7.0-13 N·m
{71.4-132.5 kgf·cm, 62.0-115.0 in·lbf}
Note
• If the No.3 engine mount bracket remove to the engine
2. Hand-tighten the No.3 engine mount rubber and No.3 engine mount bracket.
3. Tighten the bolts and nuts in the order as shown in the figure.

Crankshaft Pulley Lock Bolt Installation Note

1. Install the SST to the camshaft as shown in the figure.
Downloaded from https://carmanualshub.com/
No.3 Engine Mount Rubber and
No.3 Engine Mount Bracket
Installation Note
1. Tighten the stud bolt of the No.3 engine mount
bracket.
- automotive repair manuals website