Mazda 3 Workshop Manual page 697

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
(6) A/C compressor with the oil hose still connected and position the A/C compressor so that it is
out of the way. (See
(7) Coolant reserve tank with the hose still connected and position the coolant reserve tank so
that it is out of the way.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Start the engine.
7. Inspect the following and adjust if necessary.
• Pulley and belt for runout and contact.
• Leakage of engine oil.
• Ignition timing and idle speed. Verify the amount of CO and HC. (See
• Engine-driven accessories operation.
8. Perform a road test and verify that there is no abnormal vibration or noise.
Downloaded from
A/C COMPRESSOR REMOVAL/INSTALLATION
https://carmanualshub.com/
[LF].)
ENGINE TUNE-UP
- automotive repair manuals website
[LF].)