Oil Pan Removal/Installation [Lf] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Thickness
2.06.0 mm {0.080.24 in}
4. Tighten the bolts in the order shown.
Tightening torque
7.810.8 N·m {80-110 kgf·cm, 69.1-95.5 in·lbf}

OIL PAN REMOVAL/INSTALLATION [LF]

Warning
• Remove and install all parts when the engine is cold, otherwise they can cause severe burns or
serious injury.
• A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or
fall, causing death or serious injury. Never work around or under a lifted vehicle if it is not
securely supported on safety stands.
• Continuous exposure to used engine oil has caused skin cancer in laboratory mice. Protect your
skin by washing with soap and water immediately after working with engine oil.
1. Remove the battery cover. (See
2. Disconnect the negative battery cable.
3. Remove the under cover and splash shield as a single unit.
4. Remove the front tire (RH).
5. Drain the engine oil. (See
Downloaded from
BATTERY REMOVAL/INSTALLATION
ENGINE OIL REPLACEMENT
https://carmanualshub.com/
[LF].)
[LF].)
- automotive repair manuals website
B3E011110040W02