Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Circuit Open/Short Inspection
1. Remove the PCM connector cover.
2. Disconnect the PCM connector. (See
3. Inspect the following wiring harness for open or short circuit (continuity check).
Open circuit
• If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
- CPP switch terminal A and PCM terminal 1P
- CPP switch terminal B and body GND
Short circuit
• If there is continuity, there is a short circuit. Repair or replace the wiring harness.
- CPP switch terminal A and body GND
- CPP switch terminal B and power supply
POWER STEERING PRESSURE (PSP) SWITCH
Note
Downloaded from
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
INSPECTION [Z6]
https://carmanualshub.com/
- automotive repair manuals website
[Z6].)
B3E014032230W01